While the crusher is working, each component has its own normal working temperature range. When stone crusher is operating, we should pay attention two problems. First, the operation with the overload at low temperature should be prevented. We can operate the machine at low speed in order rise up the temperature of crushing machine. The stone crusher should be operated normally when it rise up to required temperature. Please do not ignore the preparatory temperature work only because there are no problems at that time.

Second, the mechanical operation at high temperature is also prevented. All thermograph should be checked regularly while the machine is operating. The crushing machine should stop working once there is a problem. Once failure happens, it should be solved immediately. In the usual work mini jaw crusher, we must pay serious attention to work condition of the cooling system. As to the machine cooled by water, the crushing machine should be checked before the operation and added to cooling water. As to the machine cooled by wind, the dust on the wind cool system should be clean up regularly in order to guarantee the wind cooling tube smooth.

The following are the methods of reducing crusher’s energy consumption: One, the bulk materials inside the crusher should meet the crushing requirements mini rock crusher, that is to say, the hardness of raw materials should be within the maximum hardness that the crusher can be broken. Two, materials that not belong to the crushing materials like as iron block should be prevented into the crusher in the process of crushing. Three, screen classifier should be installed reasonably, by which the materials been crushed can be segregated avoiding repeating crushing. Four, the stress situation should be improved, by which the function Laminated crushing van be fully brought into play. Besides, the hardness of the feed materials should be uniform while crusher working.

rotary drying machine: http://www.ft-dryer.com/products/Sand-dryer.html