Made in India
Under the unchanged condition of the quality of dried lignite, lignite dryer adopts low temperature four class drying process to make the moisture content of lignite evaporated below 13%. Lignite rotary dryer has automated devices which are free from flame and explosion to prevent the occurrence of accidents during its production process. Fote lignite coal dryer has experienced technology experts and on the construction the sites to ensure the stable operation of the equipment .our after-sales services include free warranty for one year and lifetime maintenance to bring customers more benefits.
Lignite coal dryer is suitable for drying coal sludge, coal, flotation clean coal, mixed clean coal in coal industry; blast furnace slag, clay, Alta mud, quartzite, limestone, sand and other materials in construction industry; metal concentrates, sludge, tailings and other materials in mineral separation industry; as well as the non-heat-sensitive materials in chemical industry. Working Principle of Lignite rotary Dryer: Wet materials are sent to the hopper by belt conveyor or bucket elevator and through the feeding hopper, the materials are sent to the inside. Adjust to the feeding pipe slope so that the wet materials can flow smoothly down in the Lignite Dryer. The materials are sent from the higher end and the heat will be sent to the lower end, thus the materials and the heat will fully contact because of the gravity force. During the materials moving forward in the Lignite Dryer, the materials are directly and indirectly dried by the heater and then are sent to the discharging port.
All lubricating oil of the industrial lignite coal dryer shall all be released, thoroughly clean and replace the new oil when the lignite dryer put into operation for a month. Hereafter, changing the oil about every 6 months. All lubrication condition of each lubricating point and oil level should check at least every 4 hours. When the mill is in operation, the lubricating oil temperature of main bearing is no more than 55℃. During normal operation of mill, temperature of the bearing and reducer are not more than 55 ℃, the highest do not exceed 60 ℃.
If you have any other question or have an interest on our product ,you can write to us: info@sinoftm.com.
china river sand dryer: http://www.chinaftm.com/products/River-sand-dryer.html
Tags:
Posted by Hemshila maheshwari on March 10, 2024 at 5:19pm 0 Comments 0 Likes
Posted by Hemshila maheshwari on March 10, 2024 at 5:18pm 0 Comments 0 Likes
Posted by Hemshila maheshwari on September 12, 2023 at 10:31am 0 Comments 1 Like
Posted by Pooja Yadav shawak on July 31, 2021 at 10:01am 0 Comments 1 Like
Posted by Jasmine Singh on July 15, 2021 at 6:25pm 0 Comments 1 Like
Posted by Pooja Yadav shawak on July 6, 2021 at 12:15pm 1 Comment 2 Likes
Posted by Pooja Yadav shawak on June 25, 2021 at 10:04pm 0 Comments 3 Likes
Posted by Pooja Yadav shawak on March 24, 2021 at 1:54pm 1 Comment 1 Like
वो जो हँसते हुए दिखते है न लोग
अक्सर वो कुछ तन्हा से होते है
पराये अहसासों को लफ़्ज देतें है
खुद के दर्द पर खामोश रहते है
जो पोछतें दूसरे के आँसू अक्सर
खुद अँधेरे में तकिये को भिगोते है
वो जो हँसते हुए दिखते है लोग
अक्सर वो कुछ तन्हा से होते है
© 2024 Created by Facestorys.com Admin. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service