Made in India
Dry powder briquette maker is a kind of equipment compressing powder material into ball. It has a wide application, and can be used to granulate and pelletize most of the powdery material, Here Henan Fote Heavy Machinery will introduces the dry powder briquetting machine placement:
1. Before starting check the electrical department is normal. Confiscated two rolls of the die holes on it, such as wrong, open the gear cover, loosen the conciliation on the driving gear plate with the six screws, positive and negative rotation drive roll made two roller die after being, tighten the screws as well. Roller spacing should be maintained between the 0.4-0.7mm, if there are too more to them than small, loose drive roll and bearings and brushed, to mediation, adjustment is completed, tighten the screws and wire drawing.
http://www.ftm-mac.com/pt14.html" style="color:#B900DC">Dry Powder Briquetting Machine</a>" src="http://www.ftm-mac.com/images/4_20130925041735205b.jpg"/>
2. Check the electrical work is normal, rollers and hydraulic steering is turned of mercury. Check whether the two rolls of the die holes, two roller spacing between 0.4-0.7mm, too big and small should mediate. If the roller die holes right opens the gear cover, loosen the mediation on the driving gear plate with the six screws, forward or reverse rotation adjustment, screw after the adjustment. If two roller spacing, large or small, should be active (active) axis and automatic rotation of the four adjustment, adjustable on both sides, everything normal, machine oil should be combined with the accelerators. Hydraulic oil, hydraulic fluid mercury inside. Power on the test pressure, voltage 11MPa profile at the end of the 13MPa. All normal rear power on pilot production.
4. When dry powder briquette making machine normal working hours, to ensure that the deviation of the belt does not, if the belt is not straight, mediation before and after the roll bearing in screw small compression ball machine. Boot mediation strap it up, is the deviation of the belt shall not, credential molding machine production of dry powder pressure the ball machine adjusting gate size, makes for not too much as to.
5. If clutch slippage in production, loosen JAWS firmly on mediating credentials yields mediation dual axis mixing blade angle to ensure the host material. If you need to accompanied by annexed material (stained, waterproof), in a blender Add.
Welcome to visit Fote Machinery: info@sinoftm.com.
quicklime dry powder ball press machine: http://www.chinaftm.com/products/Quicklime-briquette-press-machine....
Tags:
Posted by Hemshila maheshwari on March 10, 2024 at 5:19pm 0 Comments 0 Likes
Posted by Hemshila maheshwari on March 10, 2024 at 5:18pm 0 Comments 0 Likes
Posted by Hemshila maheshwari on September 12, 2023 at 10:31am 0 Comments 1 Like
Posted by Pooja Yadav shawak on July 31, 2021 at 10:01am 0 Comments 1 Like
Posted by Jasmine Singh on July 15, 2021 at 6:25pm 0 Comments 1 Like
Posted by Pooja Yadav shawak on July 6, 2021 at 12:15pm 1 Comment 2 Likes
Posted by Pooja Yadav shawak on June 25, 2021 at 10:04pm 0 Comments 3 Likes
Posted by Pooja Yadav shawak on March 24, 2021 at 1:54pm 1 Comment 1 Like
वो जो हँसते हुए दिखते है न लोग
अक्सर वो कुछ तन्हा से होते है
पराये अहसासों को लफ़्ज देतें है
खुद के दर्द पर खामोश रहते है
जो पोछतें दूसरे के आँसू अक्सर
खुद अँधेरे में तकिये को भिगोते है
वो जो हँसते हुए दिखते है लोग
अक्सर वो कुछ तन्हा से होते है
© 2024 Created by Facestorys.com Admin. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service