Hongxing Raymond grinding mill is widely used to grind potassium feldspar, talc, barite, calcite, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, glass, thermal insulation materials and other non-flammable and non-explosive materials with mohs hardness not more than 9.3 and humidity below 6% in mineral, chemical, building and other industries. Particle size of R-type crushing mill finished product can be discretionarily adjusted between 80-325 mesh, and granularity of some materials can be up to 600 mesh. And today the expert of Hongxing will tell you about installation notes of Raymond grinder.

What should notice to instaaltion of this crushing mill is as follows:

1, first of all, into the drive base pit fill and level up, pay attention to control A certain height, and then use the upper level calibration plane 'A', at the same time will drive device installed in the 'A' on the bolted.

2, install the Raymond mill.Before installation should be on the base bottom plane contact with cement foundation and anchor bolt connection between rubber cushion pad (see chart), and then use 'B' plane frame level calibration base, calibration points for cross reticle at four o 'clock, at the same time is two and a half coupling 'C', 'D', it is not alignment should be less than 0.20 mm, E1, E2 don't parallelism shall not be greater than 0.1 mm, 'E1', 'E2' gap should be kept within 5-8 mm.

3, the location of the pipework and height shall be installed in accordance with the general layout and shall not be any change and heightening, each pipe joint shall be sealed and tighten after can not have leakage phenomenon.Electrical equipment should be accurate and reliable, parts should be done after the installation commissioning.

In addition, they are professional china sand washer, cement equipment, sand maker for sale, etc,. If you have any other question or have an interest on our product ,you can write to us: sales@hxjq.com

Since its inception, grinding plant has been widely recognized and trusted by customers, which creates enormous economic benefit for enterprises. Hongxing Machinery is the manufacturer that always make customers reliable and rest assured. For many years, Hongxing Machinery adheres to the principle of using technological progress to ensure quality enhancement of products, which brings real benefits to customers and realizes win-win situation between customers and company. For more information about our products, please sent us emails to sales@hxjq.com, we will contact you as soon as possible.

micro powder grinding mill: http://www.hxjq-ballmill.com/pro/micro_grinder.html